Amiga Plus 1995 #2

home *** CD-ROM | disk | FTP | other *** search

/ Amiga Plus 1995 #2 / Amiga Plus CD - 1995 - No. 2.iso / internet / faq / englisch / sgi-performer < prev next >

Wrap

Text File | 1995-04-11 | 48.3 KB | 1,330 lines

Archive-name: sgi/faq/performer Last-modified: Sat Dec 17 12:14:20 CST 1994 SGI performer Frequently Asked Questions (FAQ) This is one of the Silicon Graphics FAQ series, which consists of: SGI admin FAQ - IRIX system administration SGI apps FAQ - Applications and miscellaneous programming SGI audio FAQ - Audio applications and programming SGI graphics FAQ - Graphics and user environment customization SGI hardware FAQ - Hardware SGI impressario FAQ - IRIS Impressario SGI inventor FAQ - IRIS Inventor SGI misc FAQ - Introduction & miscellaneous information SGI movie FAQ - Movies SGI performer FAQ - IRIS Performer SGI pointer FAQ - Pointer to the other FAQs Read the misc FAQ for information about the FAQs themselves. Each FAQ is posted to comp.sys.sgi.misc and to the news.answers and comp.answers newsgroups (whose purpose is to store FAQs) twice per month. If you can't find one of the FAQs with your news program, you can get it by anonymous FTP from one of these sites: viz.tamu.edu:/pub/sgi/faq/ rtfm.mit.edu:/pub/usenet/news.answers/sgi/faq/ ftp.uu.net:/usenet/news.answers/sgi/faq/ Note that rtfm.mit.edu is home to many other FAQs and informational documents, and is a good place to look if you can't find an answer here. If you can't use FTP, send mail to mail-server@rtfm.mit.edu with the word 'help' on a line by itself in the text, and it will send you a document describing how to get files from rtfm.mit.edu by mail. Send the command 'send usenet/news.answers/sgi/faq/misc' to get the SGI misc FAQ, and similarly for the other FAQs. Finally, the FAQs are on the World Wide Web at http://www.cis.ohio-state.edu/hypertext/faq/usenet/sgi/top.html The SGI FAQs are freely distributable and we encourage wide circulation. You MUST keep the FAQs intact, including headers and this notice. The contents are accurate as far as we know, but the usual disclaimers apply. (In particular, copies of the SGI FAQs published on paper or CD-ROM are certain to be out of date!) Please send additions and changes to sgi-faq@viz.tamu.edu. Topics covered in this FAQ: --------------------------- -1- What is IRIS Performer? -2- Where can I get more technical information about IRIS Performer? -3- Where can I get more product information about IRIS Performer? -4- How does IRIS Performer relate to IRIS Inventor? -5- What are the released versions of IRIS Performer? -6- Is there a IRIS Performer file format? -7- What database file formats can IRIS Performer read? -8- Is there an IRIS Inventor file reader for IRIS Performer? -9- What are the .tlf files used by the Performer Town and Village? -10- What are the minimum requirements for using IRIS Performer? -11- Binary Compatibility on different machines -12- Binary Compatibility on different releases -13- Guaranteeing Real Time performance -14- How do I make GL calls from within a IRIS Performer program? -15- How do I overlay graphics on top of my Performer scene? -16- What is the difference between phases FREE, FLOAT, and LOCK? -17- Which rendering primitives does IRIS Performer support? -18- How do I do triangle meshes in Performer? -19- What is pfInit(): mmap failed for /dev/zero ? -20- =============== KNOWN PROBLEMS =============== -21- Performer Town or Village demos -22- Antialiasing -23- Z buffer configuration on 4.0.5 RealityEngine -24- Coplanar Polygons & pfDecal on certain platforms -25- Networked graphics -26- Transparency -27- Frame control on low- and mid-range machines -28- Timing on pre-1992 platforms -29- 1.2 Bug Billboard normals and intersections -30- 1.2 Bug Billboards with multiple pfGeoSets -31- 1.2 Bug Flattening transformation hierarchies -32- 1.2 Bug Gangdraw and cursor loading -33- 1.2 libpf Bug Hang on Exit, 5.2 VGX -34- 1.2 libpf Cull with overlapped draw latency -35- 1.2 libpf Cull with overlapped draw hang -36- 1.2 libpf Transparency Sorting -37- 1.2 libpf Multiple EarthSky fog -38- 1.2 libpf Bug Limit Phase -39- 1.2 libpr Highlighting when using wireframe -40- 1.2 libpf APPCULLDRAW does not honor LIMIT/FLOAT/LOCK phases -41- 1.2 libpf Phase toggling overlapped cull and draw -42- 1.2 libpf pfDataPool warning on exit -43- 1.2 libpf Multi-channel stats warning messages -44- 1.2 libpf Video warnings on Indy when multiprocessed -45- 1.2 stats Frame statistics for lightpoints -46- 1.2 stats Pixel fill statistics under 4.0.5 on RealityEngine -47- 1.2 libpr Directional pfLightPoints -48- 1.2 libpfutil pfuCollide is jerky -49- 1.2 libpfutil pfuSaveImage broken -50- 1.2 libpfsgi pfLoadDxf loader is incomplete -51- 1.2 libpfsgi pfLoadIv loader is incomplete -52- 1.2 GLX Overlay text with GLX on 4.0.5 -53- 1.2 GLX Toggling antialiasing with GLX on 4.0.5 RealityEngine -54- 1.2 GLX Toggling antialiasing with GLX on any RealityEngine -55- 1.2 GLX on 4.0.5 Indigo, sample programs hang on startup. -56- 1.2 samples smallfly drive models broken -57- 1.2 samples pickfly drops core under abuse -58- 1.2 samples detail example broken on 4.0.5 -59- 1.2 friends Belvis makefile requires pmake -60- 1.2 friends Toon has bad models and textures -61- 1.2 docs pfuGetGLXWin wrong on reference page -62- 1.2 docs pfuLockDownApp gives the incorrect location -63- 1.1 Bug with FP underflow -64- 1.1 Bug with Multipipe Onyx -65- 1.1 Bug Installing on Indy or Indigo2 XL -66- 1.1 Bug Unable to determine Indy graphics type -67- 1.1 Bug perfly cannot find libpf.so on Indy running 5.1 -68- 1.1 Bug perfly FP error messages in 5.0.1 -69- 1.1 Bug Installation on IRIX 5.2 - missing prerequisites -70- 1.0/1.1 Bug intersections with pfSwitch'es -71- 1.0/1.1 Bug with pfTexture() -72- 1.0/1.1 Bug with pfAntiAlias() -73- 1.0/1.1 Bug with pfFlatten() -74- 1.0/1.1 Bug with pfSequences -75- 1.0/1.1 Bug with pfClosestPtOnPlane() -76- 1.0/1.1 Bug on ELAN/XS with wireframe PFGS_QUADS -77- 1.0 Doc Bug in pfMakePolarSeg() man page -78- 1.0 Doc Bug in pfDispList() man page -79- 1.0 Doc Bug in PFPG (simple.c) -80- 1.0 Bug in pfGetTime() -81- 1.0 Bug in pfNodeBBox() -82- 1.0 Bug in pfInitGfx() with Z-buffer on RealityEngine -83- 1.0 Bug in libpfflt combineLODs() -84- 1.0 Bug with two-sided material and pfMtlColorMode() -85- 1.0 Bug in pfFilePath() -86- 1.0 Bug in pfGetCurGState() -87- 1.0 Bug in pfGetCurState() -88- 1.0 Bug with cloned scenes -89- 1.0 Bug intersections in collide.c -90- 1.0 Bug with flattened pfLightPoints -91- 1.0 Bug intersections with pfSequences -92- 1.0 Bug intersections with non-indexed quads ---------------------------------------------------------------------- Subject: -1- What is IRIS Performer? Date: 13 Apr 94 00:00:01 EST IRIS Performer is a software development environment that supports programmers implementing high performance graphics applications on Silicon Graphics products. It offers both high level facilities for visual simulation and virtual reality tasks and an application-neutral high-performance hardware-oriented graphics toolkit. The outer application specific layer of IRIS Performer implements the tasks needed by visual simulation applications: it performs culling so that only potentially visable geometry is sent to the graphics hardware; it controls multiple display channels; it provides fast intersection tests with simulation databases; and most importantly, it orchestrates all of this in parallel with rendering on multiple processor IRIS systems. The lower-level rendering portion of IRIS Performer is designed for maximum performance: its efficient data structures reflect the details of CPU, cache, and memory system architectures; its tuned rendering loops convert the system CPU into an optimized data movement engine; and its optimized state management system optimizes hardware utilization. IRIS Performer provides a high-performance portability path across the Silicon Graphics product line. The low level library is implemented as a hardware-specific shared library, so applications based on IRIS Performer can achieve peak performance on graphics systems from Indy to RealityEngine2 without changes or recompilation. The product includes a programmer's guide and printed man pages, as well as on-line man pages, test and demonstration programs, and complete real-time visual simulation applications. These applications are provided in source form as an examples of how to build real-time simulation systems using IRIS Performer. And lastly, the distribution includes a wide variety of source code, demos, models, and utilities that have been provided by 3rd party vendors for your use. We call these vendors "friends of Performer" and we encourage you to sample their wares. ------------------------------ Subject: -2- Where can I get more technical information about IRIS Performer? Date: 06 Oct 93 00:00:01 EST The best method is to join the IRIS Performer mailing list. The list is intended to be an unmoderated, free-form discussion of IRIS Performer with issues both technical and non-technical; and to provide feedback to Silicon Graphics about the product. Much like the comp.sys.sgi.* newsgroups, it is not an official support channel but is monitored by several interested SGI employees familiar with the toolkit. To become a subscriber to the IRIS Performer mailing list you must send email to: info-performer-request@sgi.com New subscribers are added "by hand". Once your request is processed you will recieve submission/posting instructions, some guidelines, and a current copy of the Performer Frequently-Asked-Questions (FAQ) list. ------------------------------ Subject: -3- Where can I get more product information about IRIS Performer? Date: 06 Jun 93 00:00:01 EST For product information about IRIS Performer or SGI Visual Simulation issues contact John Burwell (johnnyb@asd.sgi.com). To learn about SGI Virtual Reality solutions contact Joshua Mogal (415) 390-1460 (mogal@asd.sgi.com). To just give in and buy a copy call SGI Direct at 1-800-800-7441 (product SC4-PERF-1.2), or to have both a demonstration and a presentation call your local SGI sales office. ------------------------------ Subject: -4- How does IRIS Performer relate to IRIS Inventor? Date: 26 Jun 93 00:00:01 EST The short answer is, Performer was designed for vis-sim, while Inventor was designed to be more general purpose. IRIS Performer is for developers who need to extract maximum performance from SGI machines for visual simulation, virtual reality, game development, and high-end CAD systems. Often these applications need multi-processor Onyx systems with multiple RealityEngine pipelines with a high degree of parallelism and running at fixed frame rates. Inventor is designed for maximum programmer productivity when writing other kinds of 3D applications, like modelling, animation, visualization, etc. Both toolkits are general purpose enough that they could be extended into the domain of the other, but the question you should consider is "what is the *fundamental* goal of my graphics development?" If it's portability to non-SGI systems, easy X-window system integration, or handy graphic widgets, IRIS Inventor is for you. If it's brochure- level performance in advanced graphic applications for the specific domains listed above, then IRIS Performer would be the likely tool. ------------------------------ Subject: -5- What are the released versions of IRIS Performer? Date: 8 Apr 94 00:00:01 EST IRIS Performer 1.2/IRIX5: For machines running IRIX 5.2 or above IRIS Performer 1.2/IRIX4: For machines running IRIX 4.0.5(A-J) only IRIS Performer 1.1: (now obsolete) For machines running IRIX 5.x only IRIS Performer 1.0: (now obsolete) For machines running IRIX 4.x only Note that 1.2 is shipped for both 4.0.5 and 5.2 systems. You should only install that version of IRIS Performer that is appropriate for your machine. The IRIS Performer version is indicated by the "Irix4" or "Irix5" string in each product name. Irix4 products should only be installed on 4.0.5 systems and Irix5 products should only be installed on 5.2 systems. When a choice is possible between IRIX 5.2 and IRIX 4.0.5, IRIX 5.2 is preferable. IRIX 5.2 is the current operating system release and contains many bug fixes and enhancements utilized by IRIX Performer 1.2. IRIS Performer 1.2 for IRIX 4.0.5 is intended only for users who are unable to upgrade to IRIX 5.2. ------------------------------ Subject: -6- Is there a IRIS Performer file format? Date: 26 Oct 93 00:00:01 EST Not at this time. A binary file format is a desired feature for a future release. Currently, IRIS Performer has functionality to load other vendors' database files at run time. ------------------------------ Subject: -7- What database file formats can IRIS Performer read? Date: 8 Apr 94 00:00:01 EST IRIS Performer 1.2 includes loading utilities and file loaders for: - The SGI .bin, .sgo, .gfo, .poly, and .ptu formats - IRIS Inventor's .iv format. - Coryphaeus' Software .dwb format. - Software Systems Version 11, 13, and 14 .flt - The SuperViewer .sv format used in I3DM - Lightscape Graphics Software's .lsa and .lsb formats - Autodesk's AutoCAD .dxf format - Miscellaneous formats (.gfo, .irtp, .stla, .stlb). For source code to loaders for MultiGen .flt versions greater than 11, contact Software Systems at (408) 247-4326. IRIS Performer 1.0 and 1.1 include database loaders for MultiGen v11 "flt", SGI "bin", and SGI "obj" formats. ------------------------------ Subject: -8- Is there an IRIS Inventor file reader for IRIS Performer? Date: 8 Apr 94 00:00:01 EST Yes. IRIS Performer 1.2 includes a .iv reader that will read a subset of the IRIS Inventor 1.0 format. A fully-functional reader for Open Inventor files will be released via the performer mailing list at a future time. ------------------------------ Subject: -9- What are the .tlf files used by the Performer Town and Village? Date: 8 Apr 94 00:00:01 EST They are encrypted .flt files of the Town and Village database. Only the "demo" version of perfly can read these files. Unencrypted versions of the Town and Village databases are included in the performer_friends.sw.town subsystem of Performer 1.2. ------------------------------ Subject: -10- What are the minimum requirements for using IRIS Performer? Date: 8 Apr 94 00:00:01 EST IRIS Performer 1.2/IRIX5 requires IRIX 5.2. This is the recommended configuration for users of IRIS Performer. IRIS Performer 1.2/IRIX4 requires IRIX 4.0.5. Because IRIX 4.0.5F added several new Graphics Library (GL) calls to support RealityEngine features, any application that uses GL routines or tokens found only in 4.0.5F and later, will not run properly under 4.0.5C and earlier releases. ------------------------------ Subject: -11- Binary Compatibility on different machines Date: 8 Apr 94 00:00:01 EST In Performer 1.2 for IRIX 4.0.5, libpr is platform- specific with one of two versions installed depending on whether the machines is a RealityEngine or not. Binaries linked on non-RealityEngine machines will run on a RealityEngine, but not all features will be available. Performer 1.2 for IRIX 5.2 contains a single version of libpr for all machines. Applications built with Performer 1.2 for Irix 5.2 are fully compatible across machines and can run on any Irix 5.2 machine without relinking. ------------------------------ Subject: -12- Binary Compatibility on different releases Date: 8 Apr 94 00:00:01 EST IRIS Performer requires IRIX 4.0.5 or later. Because IRIX 4.0.5F added several new GL calls to support RealityEngine features, an application that uses GL routines or tokens found only in 4.0.5F and later does not run properly under 4.0.5, 4.0.5B, or 4.0.5C. When run on these earlier IRIX releases, an IRIS Performer application making calls to GL functions or using GL tokens that are undefined in the run-time environment cause run-time errors or undefined behavior. An IRIS Performer binary compiled and linked under IRIX releases earlier than 4.0.5F, run under IRIX 4.0.5F and later, but some RealityEngine features are not directly accessible to the application. An application can still access RealityEngine features supported automatically or explicitly through IRIS Performer when linked with IRIS Performer shared libraries. Running a IRIS Performer application built with IRIX 4.0.5 on IRIX 5.X is not recommended. In particular, multiprocess applications cannot take advantage of all processors. Also, because IRIX 4.0.5's relaxed shared memory accounting was replaced by a despotic and stricter regime under IRIX 5.2, a Performer application built on 4.0.5 will need a much larger amount of swap space to be allocated up front unless PFTMPDIR is used to specify a memory mapped file. ------------------------------ Subject: -13- Guaranteeing Real Time performance Date: 8 Apr 94 00:00:01 EST Since having other applications running can effect real-time performance, it's sometimes desirable to minimize the number of daemons and other processes. If you have problems achieving real- time behavior, try the pfuLockCPU in libpfutil. You might also try turning off the desktop support and other daemons that are not crucial to your application, e.g.: % touch ~/.disableDesktop or % mkdir ~/.desktop-<machinename> % touch ~/.desktop-<machinename>/nodesktop and for total removal do: % chkconfig desktop off % chkconfig objectserver off % chkconfig directoryserver off % chkconfig fontserver off % chkconfig soundscheme off Other tips: - Be sure to run as root. - Be sure to kill any clocks, gr_osview, or other tools that may wake up and draw themselves. - When multiprocessing, make sure the executable is on a local file system. ------------------------------ Subject: -14- How do I make GL calls from within a IRIS Performer program? Date: 26 Oct 93 00:00:01 EST GL calls can only be made from a process that has a GL context. In multi-process Performer applications only the draw process has GL context, so you must make your GL calls in a function called in the draw process. The pipe initialization callback, draw function callback, and node draw callbacks are all executed in the draw process. In an application that only will ever run single-process, GL calls can be made from anywhere in the program. To set up a pipe initialization callback, see the pfInitPipe() manpage. To set up a draw function callback, see the pfChanDrawFunc() manpage. To set up a node draw callback, see the pfNodeTravFuncs() manpage. ------------------------------ Subject: -15- How do I overlay graphics on top of my Performer scene? Date: 06 Oct 93 00:00:01 EST Typically this is done to implement a heads-up display (HUD). In the draw function callback, the basic algorithm is: save state with pfPushState() disable textures, fog, & lighting with pfBasicState() save & clear projection matrix ortho2() save & clear modelling matrix draw() restore modelling matrix restore projection matrix restore state with pfPopState() Or, you can draw your static info in the overlay planes and only redraw it when the window receives a REDRAW event (moved, resized, etc.). Changing between drawing to the overlays and drawing to regular bitplanes takes a big hit. For things that need to be updated real-time, draw() would consist of: zfunction(ZF_ALWAYS); zwritemask(0x0); draw HUD stuff zfunction(ZF_LEQUAL); zwritemask(0xffffffff); ------------------------------ Subject: -16- What is the difference between phases FREE, FLOAT, and LOCK? Date: 26 Oct 93 00:00:01 EST PFPHASE_FREE_RUN wakes the application and draw processes up on the next video field boundary after the draw finishes. i.e. it's Performer's version of the usual run as-fast-as-I-can or as-slow-as-I-must mode that most simple graphics programs use. PFPHASE_FLOAT wakes the application up only on frame boundaries, i.e. time = n*(1/frame_rate). However, the draw process "floats" with respect to the frame rate and wakes up on the next possible field boundary and then does a swapbuffers() when it's done, regardless of whether it finished drawing in time for the desired frame rate. Hence you see every frame that's drawn to the backbuffer, but it may not appear at exactly the time for which it was planned. If you never frame extend, it behaves like PFPHASE_FIXED. Latency is variable. PFPHASE_LOCK wakes the application and draw up only on frame boundaries and only swaps on frame boundaries. The advantage is that each new image always appears at precisely the time for which it was rendered. The disadvantage is that if the draw runs even slightly over a frame time, you skip that entire frame and are stuck with an outdated picture for a frame. Latency is fixed. For more information see the pfPhase() man page or section 7.1.2 of the PFPG. ------------------------------ Subject: -17- Which rendering primitives does IRIS Performer support? Date: 8 Apr 94 00:00:01 EST Points (PFGS_POINTS), Independent line segments (PFGS_LINES), Connected line strips (PFGS_LINESTRIPS), Flat connected line strips (PFGS_FLAT_LINESTRIPS), Independent Triangles (PFGS_TRIS), Connected triangle strips (PFGS_TRISTRIPS), Flat Connected triangle strips (PFGS_FLAT_TRISTRIPS), Independent quadrilaterals (PFGS_QUADS). See the pfGeoSet(3pf) man page for more information. ------------------------------ Subject: -18- How do I do triangle meshes in Performer? Date: 06 Oct 93 00:00:01 EST You must change your triangle meshes to triangle strips by hand. In Performer 1.2, pfuMeshGSet (from libpfutil) will do this for you. ------------------------------ Subject: -19- What is pfInit(): mmap failed for /dev/zero ? Date: 26 Oct 93 00:00:01 EST This means that you tried to run a Performer 1.0 application (such as a 4.x version of perfly) on a machine running IRIX 5.x. Virtual memory management is different in IRIX 5.x. In order for your program to work properly you must: % setenv PFTMPDIR /usr/tmp ------------------------------ Subject: -20- =============== KNOWN PROBLEMS =============== Date: 8 Apr 94 00:00:01 EST ------------------------------ Subject: -21- Performer Town or Village demos Date: 26 Oct 93 00:00:01 EST It was reported that perfly would cause an Onyx RE or VTX running IRIX 5.0 to hang. This was fixed in 5.0.1. In 5.0.1, perfly would generate floating point exceptions due to a bug in the font manager library (libfm). This was fixed in 5.1. In 5.x, the town and village demos could sometimes be 'jerky'. This is better in 5.2. See the above section on "Guaranteeing Real Time performance" ------------------------------ Subject: -22- Antialiasing Date: 8 Apr 94 00:00:01 EST When it is not multisampling, pfAntialias can significantly degrade performance. Specifically, on non-RealityEngine systems, use pfAntialias only for lines and points. ------------------------------ Subject: -23- Z buffer configuration on 4.0.5 RealityEngine Date: 8 Apr 94 00:00:01 EST Z buffer config on 4.0.5 RealityEngine: On some versions of IRIX 4.0.5, mssize(4,24,1) (the default by pfAntiAlias) generates an unusable Z configuration. For these machines, call mssize(4,32,1) followed by gconfig() in your pipe initialization routine and do not attempt to toggle antialiasing. ------------------------------ Subject: -24- Coplanar Polygons & pfDecal on certain platforms Date: 8 Apr 94 00:00:01 EST pfDecal works only on machines that support the stencil or displacepolygon command. The default decaling mode for PFDECAL_BASE now uses displacepolygon instead of stencil. This can significantly improve rendering performance but can result in visual anomalies where layer polygons incorrectly "poke" through other geometry. If you wish the old behavior then specify the PFDECAL_BASE_HIGH_QUALITY token. ------------------------------ Subject: -25- Networked graphics Date: 8 Apr 94 00:00:01 EST Networked graphics: libpf does not support applications that use networked GL, that is DGL. However, applications using libpr can use DGL. ------------------------------ Subject: -26- Transparency Date: 8 Apr 94 00:00:01 EST pfTransparency works only on machines that support either blendfunction or multisampling. Sometimes users report that their transparency seems quantized. This is not a bug -- Performer defaults to using Multisample transparency (msalpha) when multisampling is enabled, instead of using the "standard" (blendfunction) transparency mechanism. Multisample transparency is faster but has much less resolution, and so less quality. Standard transparency using blendfunction is slower, but the quality is very good. To force Performer to use higher-quality (but slower) transparency when multisampling, 1.0/1.1: pfGStateMode (gstate, PFSTATE_TRANSPARENCY, 2); 1.2: pfGStateMode (gstate, PFSTATE_TRANSPARENCY, PFTR_HIGH_QUALITY); aka PFTR_BLEND_ALPHA In 1.0/1.1 the BLEND_ALPHA token was not exposed, but just use '2'. Be sure to revisit this code when you port to 1.2, as the token has changed. See the pfTransparency(3pf) man page for more details. ------------------------------ Subject: -27- Frame control on low- and mid-range machines Date: 8 Apr 94 00:00:01 EST Currently, the video clock (pfInitVClock, pfGetVClock, pfVClockSync) is supported only on systems with VGX, VGXT, RealityEngine, RealityEngine2, Elan, XS, and Extreme graphics hardware. On other systems, pfVClockSync returns immediately. Because libpf normally uses pfVClockSync for frame rate control, frame control is not rigorous on other platforms. ------------------------------ Subject: -28- Timing on pre-1992 platforms Date: 8 Apr 94 00:00:01 EST Several libpf functions require high-resolution timing information. On most recent machines (Indy, Indigo, Indigo2, 4D/35 and Onyx) and PowerSeries or Crimson machines with IO3 boards, IRIS Performer uses special hardware counters with sub-microsecond resolution. (The IO3 board is standard on Crimson and recent 4D/300 and 4D/400 machines. You can check for it with the hinv(1M) command.) On other platforms, for example, those with IO2 boards, the time-of-day clock is used, which, by default, has a 10 ms resolution. This resolution is inadequate for many libpf functions, including animation sequences (pfSequence), graphics load computation (pfChanStress), and the display of accurate channel statistics (pfDrawChanStats). To use any of these features on machines without high- resolution hardware timers, enable fast timers. See the man page for ftimer for more information. Frame rate control particularly bad on machines which lack both a fast clock and the video clock used by pfVClockSync. ------------------------------ Subject: -29- 1.2 Bug Billboard normals and intersections Date: 8 Apr 94 00:00:01 EST During rendering, pfBillboard normals are not affected by the transformation applied to make the geometry follow the eye. Intersection testing of line segments (pfSegsIsectNode) against the pfGeoSet's geometry and bounding box are not yet implemented; only the bounding sphere of the entire pfBillboard is available. ------------------------------ Subject: -30- 1.2 Bug Billboards with multiple pfGeoSets Date: 8 Apr 94 00:00:01 EST Using pfBillboards with more than one pfGeoSet sometimes causes a segmentation violation during the first cull traversal. Workaround: use only a single pfGeoSet per pfBillboard at some cost in performance. ------------------------------ Subject: -31- 1.2 Bug Flattening transformation hierarchies Date: 8 Apr 94 00:00:01 EST pfFlatten does not work properly on pfGeodes that share pfGeoSets with other pfGeodes. ------------------------------ Subject: -32- 1.2 Bug Gangdraw and cursor loading Date: 8 Apr 94 00:00:01 EST Loading the cursor with ganged swapbuffers (external swapready wire) hangs graphics. Workaround: don't load the cursor or run applications which change it. ------------------------------ Subject: -33- 1.2 libpf Bug Hang on Exit, 5.2 VGX Date: 8 Apr 94 00:00:01 EST On VGXT running 5.2, calling pfExit when the phase is PFPHASE_LOCK or PFPHASE_FLOAT can leave an inactive window and DRAW process. Workaround: switch to PFPHASE_FLOAT or PFPHASE_FREE before exiting or kill -9 <pid> afterwards. ------------------------------ Subject: -34- 1.2 libpf Cull with overlapped draw latency Date: 8 Apr 94 00:00:01 EST When running PFPHASE_LIMIT or PFPHASE_FREE, the draw can start late resulting in higher latency. ------------------------------ Subject: -35- 1.2 libpf Cull with overlapped draw hang Date: 8 Apr 94 00:00:01 EST When running PFPHASE_LIMIT or PFPHASE_FREE, with processes locked and non-degrading priorities, it is possible to lock out the X server and hang the system. ------------------------------ Subject: -36- 1.2 libpf Transparency Sorting Date: 8 Apr 94 00:00:01 EST When the PFCULL_SORT mode of pfChanTravMode is set, transparent objects are drawn after all opaque geometry. However, transparent objects are not sorted back to front among themselves, so visual anomalies can result when using blended transparency. Workaround: use multisample transparency (PFTR_MS_ALPHA), if available. ------------------------------ Subject: -37- 1.2 libpf Multiple EarthSky fog Date: 8 Apr 94 00:00:01 EST When using multiple pipes which share pfEarthSky fog set by pfESkyFog, the fog may appear to change densities and flash. Workaround: to guarantee that pfClearChan is not called simultaneously by more than one pipe. This may be accomplished with a hardware spin lock (see usnewlock) ------------------------------ Subject: -38- 1.2 libpf Bug Limit Phase Date: 8 Apr 94 00:00:01 EST The PFPHASE_LIMIT mode of pfPhase only works when the draw stage is configured as a separate process. For example, the PFMP_APP_CULLDRAW mode to pfMultiprocess specifies that the cull and draw stages are combined into a single process and so will not be affected by a LIMIT phase. ------------------------------ Subject: -39- 1.2 libpr Highlighting when using wireframe Date: 8 Apr 94 00:00:01 EST Using highlighting when in wireframe mode can cause random, flickering, or otherwise misbehaved polygons. ------------------------------ Subject: -40- 1.2 libpf APPCULLDRAW does not honor LIMIT/FLOAT/LOCK phases Date: 8 Apr 94 00:00:01 EST When in PFMP_APPCULLDRAW mode, both FREE_RUN and LIMIT act the same; as do FLOAT and LOCK. ------------------------------ Subject: -41- 1.2 libpf Phase toggling overlapped cull and draw Date: 8 Apr 94 00:00:01 EST When running in the PFMP_CULLoDRAW multiprocessing mode, changing the phase from PFPHASE_LOCK or PFPHASE_FLOAT to PFPHASE_FREE_RUN or PFPHASE_LIMIT can cause the application to deadlock. In perfly, rapidly toggling the phase when running with the PFMP_CULLoDRAW multiprocessing model ("perfly -m 65540" or "perfly -m 65542") can cause the application to hang. Workaround: toggle only once every few frames or not at all. ------------------------------ Subject: -42- 1.2 libpf pfDataPool warning on exit Date: 8 Apr 94 00:00:01 EST A warning similar to the following sometimes occurs when a sample program exits: "Performer Warning (2): pfReleaseDPool() Could not unlink arena shared memory /usr/tmp/pfUtilDataPool11638.pfdpool." This warning is harmless and can be ignored. ------------------------------ Subject: -43- 1.2 libpf Multi-channel stats warning messages Date: 8 Apr 94 00:00:01 EST When a multi-channel libpf application enables libpr pfStats modes (such as graphics statistics -- PFSTATS_GFX) in multiple channels at the same time, warning messages are printed every frame. The calculated statistics will be correct. To stop the stream of warning messages, raise the pfNotifyLevel in the program or set the enviornment variable PFNFYLEVEL to a value smaller than 2. ------------------------------ Subject: -44- 1.2 libpf Video warnings on Indy when multiprocessed Date: 8 Apr 94 00:00:01 EST When an application on an Indy is forced to run the APP and DRAW in separate processes, e.g. pfMultiprocess(PFMP_APP_CULLDRAW), pfGetVideoRate warnings are printed when process timing stats are on. To stop the stream of warning messages, raise the pfNotifyLevel in the program or set the enviornment variable PFNFYLEVEL to a value smaller than 2. ------------------------------ Subject: -45- 1.2 stats Frame statistics for lightpoints Date: 8 Apr 94 00:00:01 EST pfFrameStats for visible uni-directional and bi-directional pfLightPoint nodes and points are incorrect. These statistics are part of the pfFrameStats database statistics (PFFSTATS_DB) and these specific counts are incorrect. However, the counts for total number of visible pfLightPoint nodes and points are correct, and so are the counts for Omni-directional pfLightPoint nodes and points. However, these numbers are only counted when PFFSTATS_CULL are enabled. ------------------------------ Subject: -46- 1.2 stats Pixel fill statistics under 4.0.5 on RealityEngine Date: 8 Apr 94 00:00:01 EST Under 4.0.5, fill statistics do not work when multisampling. Workaround: turn off multisampling. ------------------------------ Subject: -47- 1.2 libpr Directional pfLightPoints Date: 8 Apr 94 00:00:01 EST Specifying a pfLightPoint node as PFLP_UNIDIRECTIONAL or PFLP_BIDIRECTIONAL can cause a core dump in pfLightPoint::cull. Workaround: set the color of the first light point with pfLPointColor(lp, 0, color) before calling pfLPointShape. ------------------------------ Subject: -48- 1.2 libpfutil pfuCollide is jerky Date: 8 Apr 94 00:00:01 EST The collision model jerks and bounces when you keep hitting something. ------------------------------ Subject: -49- 1.2 libpfutil pfuSaveImage broken Date: 8 Apr 94 00:00:01 EST The image file generated by pfuSaveImage is bogus. ------------------------------ Subject: -50- 1.2 libpfsgi pfLoadDxf loader is incomplete Date: 8 Apr 94 00:00:01 EST The DXF loader does not fully support the format. ------------------------------ Subject: -51- 1.2 libpfsgi pfLoadIv loader is incomplete Date: 8 Apr 94 00:00:01 EST The IRIS Inventor loader reads a subset of the IRIS Inventor 1.0 format. ------------------------------ Subject: -52- 1.2 GLX Overlay text with GLX on 4.0.5 Date: 8 Apr 94 00:00:01 EST In the sample programs (e.g. perfly) on some platforms, sometimes drawing messages (pfuDrawMessageCI) to the overlay planes in GLX mode doesn't work under 4.0.5. Workaround: use only in GL mode (e.g. do not use "perfly -x") or upgrade to IRIX 5.2. ------------------------------ Subject: -53- 1.2 GLX Toggling antialiasing with GLX on 4.0.5 RealityEngine Date: 8 Apr 94 00:00:01 EST Toggling antialiasing in the sample programs running in GLX mode on a 4.0.5 RealityEngine apparently confuses the graphics pipe and causes wild texturing. Workaround: use only in GL mode (e.g. do not use "perfly -x") or upgrade to IRIX 5.2. ------------------------------ Subject: -54- 1.2 GLX Toggling antialiasing with GLX on any RealityEngine Date: 8 Apr 94 00:00:01 EST When antialiasing is toggled with the GUI in GLX mode, the GL window changes. As each texture textures first comes into view, it is downloaded to the graphics hardware. Occasional pauses will be seen until all textures are reloaded in the graphics hardware. This can be avoided by redownloading all textures (pfuDownloadTexList). ------------------------------ Subject: -55- 1.2 GLX on 4.0.5 Indigo, sample programs hang on startup. Date: 8 Apr 94 00:00:01 EST Some sample programs will hang on startup if in GLX mode. Workaround: start up only in GL mode (e.g. do not use "perfly -x") or upgrade to IRIX 5.2. ------------------------------ Subject: -56- 1.2 samples smallfly drive models broken Date: 8 Apr 94 00:00:01 EST Toggling the drive-model button in smallfly can cause unexpected results. ------------------------------ Subject: -57- 1.2 samples pickfly drops core under abuse Date: 8 Apr 94 00:00:01 EST When aggressively navigating the hierarchy, the number of pfSCSes in the scene graph can exceed the maximum libpf traversal depth of 64. ------------------------------ Subject: -58- 1.2 samples detail example broken on 4.0.5 Date: 8 Apr 94 00:00:01 EST The example program sample/pguide/libpf/progs/detail.c doesn't run properly under 4.0.5. Workaround: upgrade to 5.2. ------------------------------ Subject: -59- 1.2 friends Belvis makefile requires pmake Date: 8 Apr 94 00:00:01 EST The makefile for the belvis demo in the Computer Arts and Development section requires the pmake utility. Workaround: install dev.sw.make. ------------------------------ Subject: -60- 1.2 friends Toon has bad models and textures Date: 8 Apr 94 00:00:01 EST Some of the textures are mixed up in toon town. ------------------------------ Subject: -61- 1.2 docs pfuGetGLXWin wrong on reference page Date: 8 Apr 94 00:00:01 EST The prototype in the man page should read: "extern void pfuGetGLXWin(pfPipe *_pipe, pfuGLXWindow *_glxWin);" pfuGetGLXWin copies the active GLX windows (normal and overlay) for the specified pipe into the provided pfuGLXWindow structure. The active windows change when a different GLX visual is requested. ------------------------------ Subject: -62- 1.2 docs pfuLockDownApp gives the incorrect location Date: 8 Apr 94 00:00:01 EST pfuLockDownApp gives the incorrect location for the procsetup.c example: The correct location for this example is: /usr/src/Performer/src/pguide/libpfutil/progs/procsetup.c Additionally, the reference page should mention the example /usr/src/Performer/src/pguide/libpf/progs/bench.c ------------------------------ Subject: -63- 1.1 Bug with FP underflow Date: 26 Oct 93 00:00:01 EST The cull process could encounter an FP underflow that could periodically affect cull performance. ------------------------------ Subject: -64- 1.1 Bug with Multipipe Onyx Date: 26 Oct 93 00:00:01 EST There is a bug in the 1.1 multipipe code. The symptom is a core dump and an error like: Performer Fatal (4):pfFree() pointer 0x9c9350 not from pfMalloc The workaround is to do the following after you've created a channel with pfNewChan: ((long**)chan)[3] = NULL; This workaround MUST NOT BE USED in Performer 1.2 applications. ------------------------------ Subject: -65- 1.1 Bug Installing on Indy or Indigo2 XL Date: 8 Apr 94 00:00:01 EST The problems are related to the way that Performer recognizes the graphics hardware in the machine. Since the Indy was introduced after Performer 1.1 released, Performer is unable to match the graphics type (NEWPORT) with the hardware types it knows. This effects both the installation and run-time applications. /usr/lib/libpr.a, /usr/lib/libpr-g.a, /usr/src/Performer/demo/perfly, and /usr/src/Performer/src/perfly/Makefile are machine-tagged in inst as platform-specific and will not be installed by default. WORKAROUND: You must remove IRIS Performer 1.1 from your machine and re-install, explicitly defining the graphics hardware type. LIGHT (Entry) graphics is the closest approximation to NEWPORT. % su # versions remove performer_eoe # versions remove performer_dev # inst -f <pathname> -m GFXBOARD=LIGHT ------------------------------ Subject: -66- 1.1 Bug Unable to determine Indy graphics type Date: 8 Apr 94 00:00:01 EST Performer 1.1 applications on Indy display the message: "unable to determine graphics type -1. Default: VENICE" WORKAROUND: The above message means that Performer was unable to match NEWPORT graphics to a known graphics type, and has defaulted to VENICE (RealityEngine). This could cause some anomalous behavior in your application. There is no specific workaround at this time. ------------------------------ Subject: -67- 1.1 Bug perfly cannot find libpf.so on Indy running 5.1 Date: 8 Apr 94 00:00:01 EST /usr/src/Performer/demo/perfly fails with the error message: "perfly: rld: Fatal Error: cannot find soname 'libpf.so'" WORKAROUND: You must recompile perfly from the source code provided in /usr/src/Performer/src/perfly. ------------------------------ Subject: -68- 1.1 Bug perfly FP error messages in 5.0.1 Date: 8 Apr 94 00:00:01 EST perfly prints the following error message(s) several times each frame: "Performer Info:FP division by zero" "Performer Info:FP infinity minus infinity" WORKAROUND: This is caused by a bug in IRIS GL and is not a fatal error. Run perfly with the "-n 2" option to disable these (and any other) informational messages. ------------------------------ Subject: -69- 1.1 Bug Installation on IRIX 5.2 - missing prerequisites Date: 8 Apr 94 00:00:01 EST When trying to install IRIS Performer 1.1 on a machine running IRIX 5.2, you will get an error regarding a missing prerequisite, "dev.sw.libC". This subsystem contained the C++ runtime library. In 5.2 it has been renamed to "c++_eoe.sw.lib". WORKAROUND: 'set rulesoverride on' from within inst. ------------------------------ Subject: -70- 1.0/1.1 Bug intersections with pfSwitch'es Date: 26 Oct 93 00:00:01 EST Intersections with pfSwitch'es whose value is PFSWITCH_OFF could cause a core dump. ------------------------------ Subject: -71- 1.0/1.1 Bug with pfTexture() Date: 26 Oct 93 00:00:01 EST On RealityEngine systems, EXTERNAL format was ignored. ------------------------------ Subject: -72- 1.0/1.1 Bug with pfAntiAlias() Date: 26 Oct 93 00:00:01 EST On RealityEngine systems, pfAntialias(PFAA_OFF) did not turn off multisampling. ------------------------------ Subject: -73- 1.0/1.1 Bug with pfFlatten() Date: 26 Oct 93 00:00:01 EST pfFlatten did not dirty bounding spheres of flattened nodes so they had improper bounds and would not cull correctly. ------------------------------ Subject: -74- 1.0/1.1 Bug with pfSequences Date: 26 Oct 93 00:00:01 EST pfSequences: PFSEQ_RESUME ignored children's display times and drew subsequent children for 1 frame only. ------------------------------ Subject: -75- 1.0/1.1 Bug with pfClosestPtOnPlane() Date: 26 Oct 93 00:00:01 EST pfClosestPtOnPlane returned wrong result. Also, the man page had the wrong prototype. ------------------------------ Subject: -76- 1.0/1.1 Bug on ELAN/XS with wireframe PFGS_QUADS Date: 26 Oct 93 00:00:01 EST On EXPRESS Graphics platforms (XS, XS24, ELAN, etc), wireframe quads have a stray line from one vertex to "infinity" when displayed in wireframe mode. ------------------------------ Subject: -77- 1.0 Doc Bug in pfMakePolarSeg() man page Date: 26 Oct 93 00:00:01 EST The man page for pfMakePolarSeg contradicts itself with respect to the meaning of azimuth and elevation. The correct paragraph should be: pfMakePolarSeg sets dst to the segment which starts at pos and has length length and points in the direction specified by azi and elev. azi specifies the azimuth (or heading), which is the angle which the projection of the segment in the X-Y plane makes with the +Y axis. elev specifies the elevation (or pitch), the angle with respect to the X-Y plane. The positive Y axis is azi=0 and elev=0. Azimuth follows the right hand rule about the +Z azis, e.g. - +90 degrees is the -X axis. Similarly, elevation follows the right hand rule about the X axis, e.g. - +90 degrees is the +Z axis. Note that in IRIS Performer 1.0, an azi and elev of 0.0 is equivalent to the +X axis while in 1.1, this has been changed to the +Y axis. ------------------------------ Subject: -78- 1.0 Doc Bug in pfDispList() man page Date: 26 Oct 93 00:00:01 EST The pfDispList man page says the size argument is in bytes; it should say words. ------------------------------ Subject: -79- 1.0 Doc Bug in PFPG (simple.c) Date: 26 Oct 93 00:00:01 EST The program simple.c in the IRIS Performer Programming Guide (PFPG) does not bind a light and draws a black image on Elan systems. The corrected version, which creates and binds a light in the pipe initialization callback, is in /usr/src/Performer/src/pguide ------------------------------ Subject: -80- 1.0 Bug in pfGetTime() Date: 26 Oct 93 00:00:01 EST In 1.0, pfGetTime() would occasionally return bad values (off by 4000+ seconds) on Indigo2 and machines without a fast counter, e.g. PowerSeries/IO2. There was no workaround. ------------------------------ Subject: -81- 1.0 Bug in pfNodeBBox() Date: 26 Oct 93 00:00:01 EST pfNodeBBox did not set the bounding box of a node. A symptom was that the bounding boxes of the node would not change when modifying a parent pfDCS. The workaround was to OR the value 0x0010 into the mode, e.g.- pfNodeBBox(node, &bbox, PFN_BMODE_STATIC | 0x0010); ------------------------------ Subject: -82- 1.0 Bug in pfInitGfx() with Z-buffer on RealityEngine Date: 26 Oct 93 00:00:01 EST pfInitGfx on RealityEngines would call lsetdepth(0x0, 0x0), essentially disabling zbuffering. The workaround was to call lsetdepth explicitly after pfInitGfx, in the pipe initialization callback. ------------------------------ Subject: -83- 1.0 Bug in libpfflt combineLODs() Date: 26 Oct 93 00:00:01 EST combineLODs() in the MultiGen .flt converter (in file hier.c) did not set the LOD center of combined LODs. This would result in strange LOD behavior for LODs which were not modelled about the origin. ------------------------------ Subject: -84- 1.0 Bug with two-sided material and pfMtlColorMode() Date: 26 Oct 93 00:00:01 EST Applying a back-sided material which had a color mode (pfMtlColorMode), would set the GL lmcolor mode. Since IrisGL does not support lmcolor for back-sided materials, this could have caused front-sided materials to use an improper lmcolor mode. ------------------------------ Subject: -85- 1.0 Bug in pfFilePath() Date: 26 Oct 93 00:00:01 EST pfFilePath would exit with a FATAL error if it was called twice. ------------------------------ Subject: -86- 1.0 Bug in pfGetCurGState() Date: 26 Oct 93 00:00:01 EST pfGetCurGState returned a pfGeoState which was the top of the state stack rather than the most recently applied pfGeoState. ------------------------------ Subject: -87- 1.0 Bug in pfGetCurState() Date: 26 Oct 93 00:00:01 EST pfGetCurState returned a pfGeoState which was the top of the state stack rather than the current pfState. ------------------------------ Subject: -88- 1.0 Bug with cloned scenes Date: 26 Oct 93 00:00:01 EST pfClone()'ed scenes were not properly cleaned and did not properly propagate updates. In particular, cloned pfSequences did not work. ------------------------------ Subject: -89- 1.0 Bug intersections in collide.c Date: 26 Oct 93 00:00:01 EST collide.c was shipped with a hardwired intersection mode which turned off intersection caching, substantially reducing intersection performance. ------------------------------ Subject: -90- 1.0 Bug with flattened pfLightPoints Date: 26 Oct 93 00:00:01 EST pfFlatten()'ed pfLightPoints were broken for multiprocessing modes when the application and cull processes were separate. ------------------------------ Subject: -91- 1.0 Bug intersections with pfSequences Date: 26 Oct 93 00:00:01 EST Intersections with pfSequences could sometimes turn them off (PFSEQ_STOP). ------------------------------ Subject: -92- 1.0 Bug intersections with non-indexed quads Date: 26 Oct 93 00:00:01 EST Intersection caching for non-indexed quads was broken and could case a core dump when intersection with pfGeoSets of this type. ------------------------------ End of sgi/faq/performer Digest ****************************** -- The SGI FAQ group sgi-faq@viz.tamu.edu Finger us for info on the SGI FAQs, or look in viz.tamu.edu:/pub/sgi.